Finish Running Svreprocess and Svdiscovery no result in xxxx.discovery.vcf.gz

When I finished Svreprocess, I check the output in xxxx.discovery.vcf.gz,there is nothing under the header

    ##fileformat=VCFv4.2
##ALT=<ID=DEL,Description="Deletion">
##INFO=<ID=CIEND,Number=2,Type=Integer,Description="Confidence interval around END for imprecise variants">
##INFO=<ID=CIPOS,Number=2,Type=Integer,Description="Confidence interval around POS for imprecise variants">
##INFO=<ID=END,Number=1,Type=Integer,Description="End coordinate of this variant">
##INFO=<ID=GSCOHERENCE,Number=1,Type=Float,Description="Value of coherence statistic">
##INFO=<ID=GSCOHFN,Number=1,Type=Float,Description="Coherence statistic per pair">
##INFO=<ID=GSCOHPVALUE,Number=1,Type=Float,Description="Coherence metric (not a true p-value)">
##INFO=<ID=GSCOORDS,Number=4,Type=Integer,Description="Original cluster coordinates">
##INFO=<ID=GSCORA6,Number=1,Type=Float,Description="Correlation with array intensity from Affy6 arrays">
##INFO=<ID=GSCORI1M,Number=1,Type=Float,Description="Correlation with array intensity from Illumina 1M arrays">
##INFO=<ID=GSCORNG,Number=1,Type=Float,Description="Correlation with array intensity from NimbleGen arrays">
##INFO=<ID=GSDEPTHCALLS,Number=.,Type=String,Description="Samples with discrepant read pairs or low read depth">
##INFO=<ID=GSDEPTHCALLTHRESHOLD,Number=1,Type=Float,Description="Read depth threshold (median read depth of samples with discrepant read pairs)">
##INFO=<ID=GSDEPTHNOBSSAMPLES,Number=1,Type=Integer,Description="Number of samples with discrepant read pairs in depth test">
##INFO=<ID=GSDEPTHNTOTALSAMPLES,Number=1,Type=Integer,Description="Total samples in depth test">
##INFO=<ID=GSDEPTHOBSSAMPLES,Number=.,Type=String,Description="Samples with discrepant read pairs in depth test">
##INFO=<ID=GSDEPTHPVALUE,Number=1,Type=Float,Description="Depth p-value using chi-squared test">
##INFO=<ID=GSDEPTHPVALUECOUNTS,Number=4,Type=Integer,Description="Depth test read counts (carrier inside event, carrier outside event, non-carrier inside, non-carrier outside)">
##INFO=<ID=GSDEPTHRANKSUMPVALUE,Number=1,Type=Float,Description="Depth p-value using rank-sum test">
##INFO=<ID=GSDEPTHRATIO,Number=1,Type=Float,Description="Read depth ratio test">
##INFO=<ID=GSDMAX,Number=1,Type=Integer,Description="Maximum value considered for DOpt">
##INFO=<ID=GSDMIN,Number=1,Type=Integer,Description="Minimum value considered for DOpt">
##INFO=<ID=GSDOPT,Number=1,Type=Integer,Description="Most likely event length">
##INFO=<ID=GSDSPAN,Number=1,Type=Integer,Description="Inner span length of read pair cluster">
##INFO=<ID=GSELENGTH,Number=1,Type=Integer,Description="Effective length">
##INFO=<ID=GSMEMBNPAIRS,Number=1,Type=Integer,Description="Number of pairs used in membership test">
##INFO=<ID=GSMEMBNSAMPLES,Number=1,Type=Integer,Description="Number of samples used in membership test">
##INFO=<ID=GSMEMBOBSSAMPLES,Number=.,Type=String,Description="Samples participating in membership test">
##INFO=<ID=GSMEMBPVALUE,Number=1,Type=Float,Description="Membership p-value">
##INFO=<ID=GSMEMBSTATISTIC,Number=1,Type=Float,Description="Value of membership statistic">
##INFO=<ID=GSNDEPTHCALLS,Number=1,Type=Integer,Description="Number of samples with discrepant read pairs or low read depth">
##INFO=<ID=GSNHET,Number=1,Type=Integer,Description="Number of heterozygous snp genotype calls inside the event">
##INFO=<ID=GSNHOM,Number=1,Type=Integer,Description="Number of homozygous snp genotype calls inside the event">
##INFO=<ID=GSNNOCALL,Number=1,Type=Integer,Description="Number of snp genotype non-calls inside the event">
##INFO=<ID=GSNPAIRS,Number=1,Type=Integer,Description="Number of discrepant read pairs">
##INFO=<ID=GSNSAMPLES,Number=1,Type=Integer,Description="Number of samples with discrepant read pairs">
##INFO=<ID=GSNSNPS,Number=1,Type=Integer,Description="Number of snps inside the event">
##INFO=<ID=GSOUTLEFT,Number=1,Type=Integer,Description="Number of outlier read pairs on left">
##INFO=<ID=GSOUTLIERS,Number=1,Type=Integer,Description="Number of outlier read pairs">
##INFO=<ID=GSOUTRIGHT,Number=1,Type=Integer,Description="Number of outlier read pairs on right">
##INFO=<ID=GSREADGROUPS,Number=.,Type=String,Description="Read groups contributing discrepant read pairs">
##INFO=<ID=GSREADNAMES,Number=.,Type=String,Description="Discrepant read pair identifiers">
##INFO=<ID=GSRPORIENTATION,Number=1,Type=String,Description="Read pair orientation">
##INFO=<ID=GSSAMPLES,Number=.,Type=String,Description="Samples contributing discrepant read pairs">
##INFO=<ID=GSSNPHET,Number=1,Type=Float,Description="Fraction of het snp genotype calls inside the event">
##INFO=<ID=HOMLEN,Number=.,Type=Integer,Description="Length of base pair identical micro-homology at event breakpoints">
##INFO=<ID=HOMSEQ,Number=.,Type=String,Description="Sequence of base pair identical micro-homology at event breakpoints">
##INFO=<ID=IMPRECISE,Number=0,Type=Flag,Description="Imprecise structural variation">
##INFO=<ID=NOVEL,Number=0,Type=Flag,Description="Indicates a novel structural variation">
##INFO=<ID=SVLEN,Number=.,Type=Integer,Description="Difference in length between REF and ALT alleles">
##INFO=<ID=SVTYPE,Number=1,Type=String,Description="Type of structural variant">
##fileDate=20161013
##source=GenomeSTRiP_v2.00
#CHROM  POS ID  REF ALT QUAL    FILTER  INFO

and my command is like so:

java -cp ${classpath} ${mx} \
    org.broadinstitute.gatk.queue.QCommandLine \
    -S ${SV_DIR}/qscript/SVPreprocess.q \
    -S ${SV_DIR}/qscript/SVQScript.q \
    -gatk ${SV_DIR}/lib/gatk/GenomeAnalysisTK.jar \
    --disableJobReport \
    -cp ${classpath} \
    -configFile ${SV_DIR}/conf/genstrip_parameters.txt\
    -tempDir ${SV_TMPDIR} \
    -R /home/liyc/test_bam/1000G_phase1/human_g1k_v37.fasta \
    -genomeMaskFile /home/liyc/test_bam/1000G_phase1/human_g1k_v37.svmask.fasta \
    -copyNumberMaskFile /home/liyc/test_bam/1000G_phase1/human_g1k_v37.gcmask.fasta \
    -genderMaskBedFile /home/liyc/test_bam/1000G_phase1/human_g1k_v37.gendermask.bed \
    -runDirectory ${runDir} \
    -md ${runDir}/metadata \
    -disableGATKTraversal \
    -useMultiStep \
    -reduceInsertSizeDistributions false \
    -computeGCProfiles true \
    -computeReadCounts true \
    -jobLogDir ${runDir}/logs \
    -I ${inputFile} \
    -run \
    || exit 1
# Run discovery.
java -cp ${classpath} ${mx} \
    org.broadinstitute.gatk.queue.QCommandLine \
    -S ${SV_DIR}/qscript/SVDiscovery.q \
    -S ${SV_DIR}/qscript/SVQScript.q \
    -gatk ${SV_DIR}/lib/gatk/GenomeAnalysisTK.jar \
    --disableJobReport \
    -cp ${classpath} \
    -configFile /home/liyc/SV/svtoolkit/installtest/conf/genstrip_installtest_parameters.txt\
    -tempDir ${SV_TMPDIR} \
    -R /home/liyc/test_bam/1000G_phase1/human_g1k_v37.fasta \
    -genomeMaskFile /home/liyc/test_bam/1000G_phase1/human_g1k_v37.svmask.fasta \
    -genderMapFile /home/liyc/test_bam/test_gender.map \
    -runDirectory ${runDir} \
    -md ${runDir}/metadata \
    -disableGATKTraversal \
    -minimumSize 100 \
    -maximumSize 1000000 \
    -jobLogDir ${runDir}/logs \
    -suppressVCFCommandLines \
    -I ${inputFile} \
    -O ${sites} \
    -run \
    || exit 1

Through my Svpreprocess I have met 3 problems,the first is that:

INFO  14:43:05,581 QGraph - Failed:   samtools index test2_2_new/metadata/headers.bam

I just extract the failed component.I solve this by run by hand:

 samtools index headers.bam

The second and third problem are as followd:

  INFO  14:59:58,545 QGraph - Failed:   'java'  '-Xmx2048m'  '-XX:+UseParallelOldGC'  '-XX:ParallelGCThreads=4'  '-XX:GCTimeLimit=50'  '-XX:GCHeapFreeLimit=10'  '-Djava.io.tmpdir=/home/liyc/test_bam/test2_raw/tmpdir2_2'  '-cp' '/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/SVToolkit.jar:/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/gatk/GenomeAnalysisTK.jar:/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/gatk/Queue.jar'  '-cp' '/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/SVToolkit.jar:/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/gatk/GenomeAnalysisTK.jar:/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/lib/gatk/Queue.jar'  'org.broadinstitute.sv.apps.ComputeDepthProfiles'  '-O' '/home/liyc/test_bam/test2_raw/test2_2_new/metadata/profiles_100Kb/profile_seq_2_100000.dat.gz'  '-I' 'test2_2_new/metadata/headers.bam'  '-configFile' '/home/liyc/SV/svtoolkit/liuc_sv/svtoolkit/conf/genstrip_parameters.txt'  '-R' '/home/liyc/test_bam/1000G_phase1/human_g1k_v37.fasta'  '-L' '2:0-0'  '-genomeMaskFile' '/home/liyc/test_bam/1000G_phase1/human_g1k_v37.svmask.fasta'  '-md' 'test2_2_new/metadata'  '-profileBinSize' '100000'  '-maximumReferenceGapLength' '10000'
    INFO  14:59:58,545 QGraph - Log:     /home/liyc/test_bam/test2_raw/test2_2_new/logs/SVPreprocess-21.out
    INFO  14:59:58,546 QCommandLine - Script failed: 2 Pend, 0 Run, 1 Fail, 186 Done

I just solved them by rerun the Queue, and it did not output failed.

My headers.bam was that:

    @HD VN:1.5  GO:none SO:coordinate
@SQ SN:1    LN:249250621
@SQ SN:2    LN:243199373
@SQ SN:3    LN:198022430
@SQ SN:4    LN:191154276
@SQ SN:5    LN:180915260
@SQ SN:6    LN:171115067
@SQ SN:7    LN:159138663
@SQ SN:8    LN:146364022
@SQ SN:9    LN:141213431
@SQ SN:10   LN:135534747
@SQ SN:11   LN:135006516
@SQ SN:12   LN:133851895
@SQ SN:13   LN:115169878
@SQ SN:14   LN:107349540
@SQ SN:15   LN:102531392
@SQ SN:16   LN:90354753
@SQ SN:17   LN:81195210
@SQ SN:18   LN:78077248
@SQ SN:19   LN:59128983
@SQ SN:20   LN:63025520
@SQ SN:21   LN:48129895
@SQ SN:22   LN:51304566
@SQ SN:X    LN:155270560
@SQ SN:Y    LN:59373566
@SQ SN:MT   LN:16569
@SQ SN:GL000207.1   LN:4262
@SQ SN:GL000226.1   LN:15008
@SQ SN:GL000229.1   LN:19913
@SQ SN:GL000231.1   LN:27386
@SQ SN:GL000210.1   LN:27682
@SQ SN:GL000239.1   LN:33824
@SQ SN:GL000235.1   LN:34474
@SQ SN:GL000201.1   LN:36148
@SQ SN:GL000247.1   LN:36422
@SQ SN:GL000245.1   LN:36651
@SQ SN:GL000197.1   LN:37175
@SQ SN:GL000203.1   LN:37498
@SQ SN:GL000246.1   LN:38154
@SQ SN:GL000249.1   LN:38502
@SQ SN:GL000196.1   LN:38914
@SQ SN:GL000248.1   LN:39786
@SQ SN:GL000244.1   LN:39929
@SQ SN:GL000238.1   LN:39939
@SQ SN:GL000202.1   LN:40103
@SQ SN:GL000234.1   LN:40531
@SQ SN:GL000232.1   LN:40652
@SQ SN:GL000206.1   LN:41001
@SQ SN:GL000240.1   LN:41933
@SQ SN:GL000236.1   LN:41934
@SQ SN:GL000241.1   LN:42152
@SQ SN:GL000243.1   LN:43341
@SQ SN:GL000242.1   LN:43523
@SQ SN:GL000230.1   LN:43691
@SQ SN:GL000237.1   LN:45867
@SQ SN:GL000233.1   LN:45941
@SQ SN:GL000204.1   LN:81310
@SQ SN:GL000198.1   LN:90085
@SQ SN:GL000208.1   LN:92689
@SQ SN:GL000191.1   LN:106433
@SQ SN:GL000227.1   LN:128374
@SQ SN:GL000228.1   LN:129120
@SQ SN:GL000214.1   LN:137718
@SQ SN:GL000221.1   LN:155397
@SQ SN:GL000209.1   LN:159169
@SQ SN:GL000218.1   LN:161147
@SQ SN:GL000220.1   LN:161802
@SQ SN:GL000213.1   LN:164239
@SQ SN:GL000211.1   LN:166566
@SQ SN:GL000199.1   LN:169874
@SQ SN:GL000217.1   LN:172149
@SQ SN:GL000216.1   LN:172294
@SQ SN:GL000215.1   LN:172545
@SQ SN:GL000205.1   LN:174588
@SQ SN:GL000219.1   LN:179198
@SQ SN:GL000224.1   LN:179693
@SQ SN:GL000223.1   LN:180455
@SQ SN:GL000195.1   LN:182896
@SQ SN:GL000212.1   LN:186858
@SQ SN:GL000222.1   LN:186861
@SQ SN:GL000200.1   LN:187035
@SQ SN:GL000193.1   LN:189789
@SQ SN:GL000194.1   LN:191469
@SQ SN:GL000225.1   LN:211173
@SQ SN:GL000192.1   LN:547496
@RG ID:ST-E0020653.1    PL:ILLUMINA PU:H5KFTCCXX.1.test LB:lib1 SM:test1
@PG ID:bwa  PN:bwa  VN:0.7.12-r1039 CL:bwa mem -t 10 -R @RG\tID:ST-E0020653.1\tPL:ILLUMINA\tPU:H5KFTCCXX.1.test\tLB:lib1\tSM:test1 /home/liyc/test_bam/1000G_phase1/human_g1k_v37.fasta 1_test2.fastq 2_test2.fastq

I use the bwa in my system that vision is :

Program: bwa (alignment via Burrows-Wheeler transformation)
Version: 0.7.12-r1039
Contact: Heng Li <lh3@sanger.ac.uk>

Thank you very much!